The Watch Protect Company

Rolex Datejust 41 126300 Watch Protection Kit


Created for the entire Rolex Datejust 41 range, this watch protection kit can be applied to watches, ranging from precious metal gold pieces to stainless steel.

The Watch Protection Kit fits the following:

All Datejust 41 models on a jubilee and oyster bracelet

Designed to be as discreet as possible, our watch protection kits ensure you can maintain the shiny new look and feel of your watch while you wear it on a daily basis, not having to worry about getting it scratched.

This kit covers the following areas:

- Watch Case and Lugs

Smooth Bezel (Select Relevant Option)

- Oyster Bracelet 

- Clasp

    All areas of the watch have been precisely cut to ensure a seamless and invisible finish.

    We provide 3 different tier packages to protect your watch:


    Tier 1 is our Full Set protection - protecting the full clasp, side casing, lugs, bezel* and bracelet of your watch.


    Tier 2 is our Half Set protection - protecting the full clasp, side casing, lugs, end links* and bezel* of your watch.


    Tier 3 is our Clasp Only protection - protecting the full clasp of your watch.

    *Where stated on the product description

    Watch not included 



    1. Prepare your watch using our specially formulated TWPC dual action foam cleanser which safely lifts and cleans dirt and grime from your watch, while restoring its shine.  

    2. Ensure the watch has thoroughly dried and remove dust with the TWPC microfibre cloth.

    3. Pour the TWPC Solution into a bowl.

    4. Using the TWPC tweezers, carefully remove a stencil from its corner on the film backing.

    5. Whilst holding the stencil with the tweezers, fully immerse it into the solution. 

    6. Carefully place the stencil so that it is perfectly aligned with the corresponding area of your watch.

    7. Using the microfibre cloth, gently apply pressure with your finger to activate adhesion. We recommend to start in the middle and apply pressure outwards to avoid air bubbles. Then, gently wipe away any excess solution.

    8. Leave the watch to dry for 24 hours, over which period any excess residue will evaporate.

    *The TWPC Brush is only provided in Tier 1 & 2 – Watch Protection Kits

    Even though applying a watch protection kit might seem straightforward, we understand that issues can arise. Whether you're dealing with air bubbles, misalignment, or difficulty adhering the protector smoothly, we've got you covered. Our expert tips and techniques will help you overcome these common challenges and achieve a flawless application.


    Why should I buy this kit?

    Engineered from cutting edge nano technology, our film has self healing abilities, and we understand this to be an important aspect of our kits. Regardless of how careful you are, chances are you will get scratches on your watch. Should this occur, don’t worry – under room temperature they will disappear within 24 hours and it would be like they were never there in the first place.

    Does it look like tape?

    Absolutely not. Our protection kits are near invisible to the eye, even when you look close up. You will not be able to tell once the kit is applied, it is transparent and does not affect the shine of the watch.

    Does it add any weight onto the watch?

    No, thanks to our advanced material technology our kits are negligible in weight.   

    How long does it last?

    Our protection kits can last up to 5 years. 

    Does the application fluid react the metal?

    The application fluid is safe to use on both precious metal and stainless steel watches. It also leaves no residue when removed.

    Is it water resistant?

    Yes, they are water resistant and contact with water will not effect the film. Our kits are also UV resistant, which enables them to maintain their aesthetical properties despite exposure to sunlight. Furthermore, they are also resistant to chemicals allowing you to use your watches they way you want, without the need to worry about scratching them.

    Are The Watch Protection kits hard to apply?

    Not at all, we have put together a complete package for you to apply in the comfort of your own home. Each kit comes with a detailed instructions leaflet. The whole process should take about 30 minutes or less. 

    Are you going to cover more watches models in the future?

    Yes, most definitely. We are all about precision and getting it right, if we haven’t already got the model you want, please get in contact with us.

    Customer Reviews

    Based on 8 reviews
    Josh C
    Great Product!

    Initially brought the clasp only protection kit for my DJ41 which was great so decided to get the lugs and side casing protection as well. Messaged them via instagram with a few queries and they responded swiftly. Overall great product and experience.

    Ahmed Alemadi
    Perfect order and service

    Perfect order and service Thanks

    Great customer service

    Despite having a few problems attaching the film with my timepiece, upon contacting The Watch Protect Company they were very swift addressing my concern and yes I was very happy that they assisted me right away. The protective film looks great on my watch now and I highly recommend their film for those who want to minimize the scraches and dings with their timepieces.

    Excellent service

    Excellent service. Precise fitting on protection stickers. Speedy delivery. Customer service very helpful with any queries and dealt with in fine fashion. Presentation is second to non and probably overkill however it is a nice touch on opening. The cleaning brush is kept in the shower to keep my watches spick and span.

    Syed Asad Bukhari
    Great Service, will buy again

    I personally had a really good experience with the company. the product itself is very good and have protected my watch. I also needed additional stickers for which I reached out to the team and they were very quick to offer me one off stickers

    You may also like

    Recently viewed