The Watch Protect Company
Rolex DayDate 40 Watch Protection Kit
Created for the entire Rolex DayDate 40 range, this watch protection kit can be applied to watches, ranging from precious metal gold pieces to platinum.
The Watch Protection Kit fits the following:
All DayDate 40 models
Designed to be as discreet as possible, our watch protection kits ensure you can maintain the shiny new look and feel of your watch while you wear it on a daily basis, not having to worry about getting it scratched.
This kit covers the following areas:
- Watch Case and Lugs
All areas of the watch have been precisely cut to ensure a seamless and invisible finish.
We provide 3 different tier packages to protect your watch:
TIER 1: FULL SET
Tier 1 is our Full Set protection - protecting the full clasp, side casing, lugs, bezel* and bracelet of your watch.
TIER 2: HALF SET
Tier 2 is our Half Set protection - protecting the full clasp, side casing, lugs and end links* of your watch.
TIER 3: CLASP ONLY
Tier 3 is our Clasp Only protection - protecting the full clasp of your watch.
*Where stated on the product description
Watch not included
1. Clean the watch thoroughly with soapy water to remove any grease and dirt. Thoroughly dry the watch before liquid skin application.
We recommend leaving the watch to dry naturally, use a microfibre cloth to get rid of any watermarks.
2. Using the brush applicator, apply a thin layer of liquid skin on the areas of the watch you want protected.
Do not over saturate the brush.
3. Using gentle and consistent strokes, apply the liquid skin to each piece of the watch individually. Gently brush out any bubbles or inconsistencies.
Take care not to apply over screws, underneath the crown, any watch case openings or anywhere where once the liquid skin has dried, could jam openings. We also recommend not applying over the glass.
4. Follow Step 3 and apply a further 2 layers, with 30 minute intervals between each layer.
5. Leave to dry at room temperature for 24 hours.
WATCH PROTECTION KITS
1. Clean the watch thoroughly with soapy water and the TWPC brush* to remove grease and dirt.
2. Ensure the watch has thoroughly dried and remove dust with the TWPC microfibre cloth.
3. Pour the TWPC Solution into a bowl.
4. Using the TWPC tweezers, carefully remove a stencil from its corner on the film backing.
5. Whilst holding the stencil with the tweezers, fully immerse it into the solution.
6. Carefully place the stencil so that it is perfectly aligned with the corresponding area of your watch.
7. Using the microfibre cloth, gently apply pressure with your finger to activate adhesion. We recommend to start in the middle and apply pressure outwards to avoid air bubbles. Then, gently wipe away any excess solution.
8. Leave the watch to dry for 24 hours, over which period any excess residue will evaporate.
*The TWPC Brush is only provided in Tier 1 & 2 – Watch Protection Kits
How does the Liquid Skin work?
Once applied, the liquid will harden and form a skin on your watch, absorbing daily scratches and scuffs. Although the skin is not self healing, like our protection kits, the scratches you pick up will be visible although they will not affect your watch. Over time, as the skin absorbs more scratches, it will start to peel at which point it will need a re-coat.
Is it similar to ceramic coating?
Our product is a specially formulated resin that unlike ceramic will show scratches overtime although these will not affect the metal of the watch, giving it a more natural and original look.
Is it safe to use on 18 karat gold watches?
Yes it is completely safe to use on all precious metal watches, including 18 karat white, yellow and rose gold, platinum aswell as stainless steel and titanium. It leaves no residue on the watch. It has been tried and tested!
Can I use it on any brand of watch?
Yes Liquid Skin was designed to be universal to all watches and watch lovers that want to persevere their watches regardless of value, age or brand.
Can it be applied all over the watch?
Yes, it can be applied all of the watch, although you should take care not to apply over screws, underneath the crown, any watch case openings or anywhere where once the liquid skin has dried, could jam openings. We also recommend not applying over the glass.
How long does it last?
Depending on how often you wear your watch and how many scratches you pick up - one cycle of liquid skin can last up to 3 years. Worry not, you can always re-coat your watch.
Will it affect the look of my watch?
Our coating adds a slight gloss to the metal of the watch.
Can I take it into the water?
Yes, the liquid skin is completely waterproof and resistant to everyday cleaning chemicals such as washing up liquids.
What is the best way to apply it?
Ensure your watch is thoroughly cleaned. Using the brush applicator, apply a thin layer of liquid skin onto the watch. Apply a further 2 layers with 30 minute intervals between each and leave to dry for 24 hours. We recommend applying it to each piece of the watch individually.
Watch our application video here!
I have noticed flakes on the watch, is this normal?
Yes this totally normal, and this is a sign that your watch needs a re-coat from the amount of daily wear and scratches it has had and picked up. At this point, give it a quick clean and wipe so that any weak coating falls off and reapply as you did the first time,
How should I store it?
Keep the lid tightly closed when not using to ensure the liquid does not dry. Store at 5-40˚C in a cool dry place away from any flames.
WATCH PROTECTION KITS
Why should I buy this kit?
Engineered from cutting edge nano technology, our film has self healing abilities, and we understand this to be an important aspect of our kits. Regardless of how careful you are, chances are you will get scratches on your watch. Should this occur, don’t worry – under room temperature they will disappear within 24 hours and it would be like they were never there in the first place.
Does it look like tape?
Absolutely not. Our protection kits are near invisible to the eye, even when you look close up. You will not be able to tell once the kit is applied, it is transparent and does not affect the shine of the watch.
Does it add any weight onto the watch?
No, thanks to our advanced material technology our kits are negligible in weight.
How long does it last?
Our protection kits can last up to 5 years.
Does the application fluid react the metal?
The application fluid is safe to use on both precious metal and stainless steel watches. It also leaves no residue when removed.
Is it water resistant?
Yes, they are water resistant and contact with water will not effect the film. Our kits are also UV resistant, which enables them to maintain their aesthetical properties despite exposure to sunlight. Furthermore, they are also resistant to chemicals allowing you to use your watches they way you want, without the need to worry about scratching them.
Are The Watch Protection kits hard to apply?
Not at all, we have put together a complete package for you to apply in the comfort of your own home. Each kit comes with a detailed instructions leaflet. The whole process should take about 30 minutes or less.
Are you going to cover more watches models in the future?
Yes, most definitely. We are all about precision and getting it right, if we haven’t already got the model you want, please get in contact with us.